Fire certificate for a stand at IFEMA and Fira de Barcelona: what they will ask for and who signs it (it is not just one document)

Trade show stand with certificate
Arnau Forasté Sans

Arnau Forasté Sans

Operations Director / COO of Artyplan

What fire certificate does a stand at IFEMA or Fira de Barcelona need?

It depends on the venue. Fira de Barcelona may ask you, for each material, for a fire reaction certificate issued by an accredited laboratory within the previous five years. IFEMA’s General Regulations do not require you to submit it, but they do require the same minimum classifications to be met: C-s2,d0 for walls and ceilings, EFL for floors, and Class 1 (UNE-EN 13773:2003) for suspended textiles, and this may be checked during an inspection. In practice, this “certificate” is the laboratory classification report or, for CE-marked products, the manufacturer’s Declaration of Performance. When an inspector, stand contractor or CAE coordinator asks for “the fire certificate”, they are often referring to different documents.

What fire reaction class do IFEMA and Fira de Barcelona require?

C-s2,d0 for walls and ceilings, EFL for floors and Class 1 for suspended textiles, both at IFEMA’s exhibition centre and at Fira Gran Via and Montjuïc. Two exceptions are worth knowing: IFEMA Palacio Municipal and MWC Barcelona.

Requirement IFEMA Exhibition Centre IFEMA Palacio Municipal Fira de Barcelona (Gran Via and Montjuïc) MWC Barcelona (MWC27)
Walls and ceilings C-s2,d0 B-s1,d0 C-s2,d0 Fabrics and decoration: “M1 or Euroclasses A1, A2 or B”
Floors EFL BFL-s1 EFL Not specified in the section consulted
Suspended textiles Class 1 (UNE-EN 13773) See Palacio regulations Class 1 (UNE-EN 13773) Factory fire-retardant or treated
Document Submission is not required; it may be inspected by the competent authority Only the cabling DoP Accredited laboratory report issued within the previous five years, if requested by Fira Materials may be tested in situ

Sources: IFEMA MADRID, General Participation Regulations (Art. 19) and Palacio Municipal regulations (Art. 19); Fira de Barcelona, Technical Regulations (section 1.4); GSMA, MWC27 Stand Build Rules and Regulations.

Look at the first row: B-s1,d0 complies because it performs better than C-s2,d0, but it is only mandatory at Palacio Municipal. At IFEMA, the Specific Regulations for each event may also modify the general regulations; where this happens, the specific regulations take precedence.

My recommendation: if you are building at Palacio Municipal or MWC, or you do not yet know which venue the stand will ultimately be installed at, specify B-s1,d0 for walls and ceilings. For IFEMA’s exhibition centre and for Fira, C-s2,d0 is sufficient.

Does a stand fire certificate expire? At Fira, after five years; at IFEMA there is no stated validity period

Fira de Barcelona’s Technical Regulations require all materials to have “the corresponding fire reaction certificate issued by an accredited laboratory within the previous five (5) years”. Its technical team “reserves the right to request the certificates”. They do not have to be physically kept on the stand, but you must be able to produce them if requested.

That limit also appears in the BOE. Under Article 2 of Royal Decree 842/2013, products without CE marking are tested and classified by accredited laboratories and may not be supplied or received on site “more than five years after the date of the test reports, where these concern reaction to fire”. The CTE Basic Fire Safety Document also repeats this maximum age.

And in Madrid? IFEMA’s General Regulations do not require certificates to be submitted and do not specify a validity period. They require compliance with current regulations and state that inspections may be carried out by the relevant official authorities or by the Exhibition Services Department. IFEMA may also close a stand that fails to comply with the regulations during build-up or during the event.

In practice, a report less than five years old will cover you at Fira and is what you will show at IFEMA if someone asks for it. Check the date before the class: for example, a 2018 report for an FR textile used in frames is still available online even though it ceased to be valid at Fira in 2023.

Who signs a stand fire certificate?

The classification report is signed by an accredited laboratory; the Declaration of Performance is issued by the manufacturer; and the structural documentation is signed by a competent technician at Fira (IFEMA’s General Regulations do not state who must sign it). A company applying a fire-retardant treatment certifies the treatment, not a fire classification.

Four common stand materials do not meet the venue’s minimum classification

Who signs each document, what it demonstrates and where it is required at IFEMA MADRID and Fira de Barcelona.

Proves reaction to fire

Signed by

Accredited laboratory

Classification report

UNE-EN 13501-1

Proves: the material’s Euroclass for a specific use and substrate.

Required by: Fira (less than 5 years old) and during inspections at IFEMA.

Signed by

Manufacturer

Declaration of Performance (DoP)

Regulation (EU) 305/2011

Proves: the performance of a CE-marked product.

Applies to: boards and other construction products.

Proves structural compliance

Signed by

Qualified technician

Project or responsible declaration

Regulations for each venue

Proves: that the structure is stable and complies with the regulations.

Required for: raised elements (IFEMA) and complex structures (Fira).

Source: classification reports and technical data sheets from 3A Composites (DIBOND®, FOREX®, KAPA®), Re-board Technology, Kronospan, Showtex and LNE (2022–2026). Each classification is valid only for the product, thickness and tested use. Compiled by Artyplan.

DocumentWho signs itWhat it provesWhen it is required
Reaction-to-fire classification report (UNE-EN 13501-1) Laboratory accredited by ENAC or a notified body The Euroclass of that material for a specific end use and substrate Fira, when requested (less than five years old); IFEMA, if requested by the inspection team or event
Declaration of Performance (DoP) Manufacturer The performance of a product covered by a harmonised standard and carrying CE marking Boards and other construction products
Project, responsible declaration or installation certificate Competent technician at Fira; at IFEMA, according to the event regulations That the structure is stable and complies with the regulations Raised elements at IFEMA; complex structures at Fira
Certificate of application of a fire-retardant treatment Application company That a product was applied It does not appear in IFEMA’s general regulations or in Fira’s technical regulations

Only the first two prove reaction to fire. If a material is treated with a fire retardant in the workshop, its classification is demonstrated by the classification report for the treated material, not by the applicator’s certificate.

Accredited laboratories for these tests are available in both cities: AFITI, in Arganda del Rey, with ENAC accreditation 41/LE104, and LGAI Technological Center, in Bellaterra, with accreditation 9/LE2492. The DoP is governed by Regulation (EU) 305/2011, which is being replaced by Regulation (EU) 2024/3110 with a transitional period by product family.

Is M1 the same as B-s1,d0?

No. No current standard establishes an official equivalence between the M classes of UNE 23727:1990 and the Euroclasses of UNE-EN 13501-1:2019.

There is evidence of this in the BOE itself. For two decades, the Fire Safety Regulations for Industrial Establishments (Royal Decree 2267/2004, repealed from 10 May 2025) placed class M in brackets as an alternative, matching M1 with “B-s1d0” in one section and with “B-s3 d0” in another. In 2019, Royal Decree 732/2019 removed the final reference to UNE 23727 from the CTE. The standard nevertheless remains listed as current in the UNE catalogue, and that catalogue marks the French NF P 92-507 standard as “not equivalent”.

Manufacturers also demonstrate this. A commonly used foamed PVC for graphics, in its classic version (FOREX® classic), declares both “M1” under the French NF P 92-501 standard and Euroclass C-s3,d0. That classification does not meet the venues’ C-s2,d0 requirement: s3 indicates greater smoke production than s2. A material can therefore still be rejected even if “M1” appears on its data sheet.

There are still two references to M1 in exhibition regulations. MWC Barcelona accepts “Class M1” for fabrics and decoration, while Fira accepts mesh rated “M0, M1 or M2 (Euroclass A, B or C)” only as an exception for mesh ceilings without detectors. Neither constitutes an equivalence table.

Which graphic materials for exhibition stands are fire-rated?

Those with a classification report showing the required Euroclass. Several very common materials do not reach C-s2,d0 in their standard versions. Some have suitable alternatives, such as DIBOND® FR or FOREX® print in 2–5 mm thicknesses; for foamboard and acrylic, we have not documented one. Each classification applies only to the tested product, thickness and use: a different brand or thickness requires its own report.

“The fire certificate” is actually several different documents, signed by different parties

Reaction-to-fire Euroclass (UNE-EN 13501-1) according to the classification report or the technical data sheet for the reference product. Minimum requirement for walls and ceilings at IFEMA and Fira de Barcelona: C-s2,d0.

FEDCBA2A1
Standard aluminium composite DIBOND®, PE core
× D-s2,d0
Classic foamed PVC FOREX® classic
× C-s3,d0 · fails due to smoke (s3)
Acrylic Cast PMMA, 5 mm
× E
Standard foamboard KAPA® fix
× No Euroclass (DIN 4102 B2 only)
Foamed PVC for printing FOREX® print, 2-5 mm
✓ C-s2,d0
FR honeycomb board Re-board FR, 16 mm
✓ C-s1,d0
Fire-retardant MDF Kronospan FR MDF
✓ B-s1,d0
FR polyester textile for frames Backlit Stretch Print
✓ B-s1,d0
FR aluminium composite DIBOND® FR
✓ B-s1,d0
IFEMA and Fira minimum: C-s2,d0 worse better reaction to fire

Source: Royal Decree 842/2013 (Art. 2), Regulation (EU) 305/2011, IFEMA MADRID General Participation Regulations and Fira de Barcelona Technical Regulations. Compiled by Artyplan based on Royal Decree 842/2013, Regulation (EU) 305/2011 and the regulations of IFEMA and Fira de Barcelona.

Material Reference product (report or data sheet)Class Does it meet C-s2,d0?
Standard aluminium composite, PE core DIBOND® 2 to 6 mm (IBS, 22/01/2024) D-s2,d0 No; the DIBOND® FR version is B-s1,d0
Classic foamed PVC FOREX® classic (3A data sheet, 2026) C-s3,d0 No
Foamed PVC for printing FOREX® print, 2 to 5 mm (data sheet 06/2023) C-s2,d0 Yes
Standard foamboard KAPA® fix (3A data sheet) DIN 4102 B2 only Not certified
Acrylic 5 mm cast PMMA (LNE, 15/11/2024) E No
FR honeycomb board Re-board FR, 16 mm (product data sheet) C-s1,d0 Yes, with a current report
Fire-retardant MDF Kronospan FR MDF (data sheet); veneered: Finsa DoP no. 00264 (2020) B-s1,d0; veneered, C-s1,d0 Yes
FR polyester textile for frames Backlit Stretch Print (data sheet 11/2022) B-s1,d0 Yes
510 g/m² frontlit banner SGS report dated 04/07/2020, bonded to A1/A2 substrate B-s1,d0 That report is no longer valid at Fira; request a current report for the actual end use

Two nuances can change the result. The same fabric, explains Llorenç Domingo Capdevila (TECNIFUEGO), may be “Class 1 if its final use is as a suspended fabric (curtain)” and “Cs2D0 if its final use is as a wall covering”: a tensioned textile forming the wall of a stand is assessed as a covering. For vinyl graphics, Mactac Technical Bulletin 4.6 (2025) warns that combining vinyl with a substrate “will not necessarily result in a product with the same classification”.

If a material does not have a current report

Follow this order: ask the manufacturer for the current version of the report, switch to the FR version of the substrate, or commission a test from an accredited laboratory such as AFITI or LGAI. The last option is slow; do not leave it until build-up week.

When does your stand need a project signed by a qualified technician?

When it includes raised elements or complex structures, and the thresholds are not the same at the two venues.

Requirement IFEMA (General Regulations) Fira de Barcelona (Technical Regulations)
Stand design project One month before build-up; installation cannot begin without approval Project submitted to Operations for complex structures
Maximum height 4 m (one isolated perimeter element may reach 6 m) 5 m
Technical documentation Elements measuring 1.20 m or more that support loads or people: installation inspection certificate and responsible declaration Complex structures: endorsed project or responsible declaration, technical supervision and structural stability certificate
Ceiling It cannot be completely enclosed Enclosed, with detectors (1 per 60 m²)

For externally organised trade shows, another document applies: IFEMA’s 2021 Exhibitor Regulations. For elements measuring 1.20 m or more, it requires documentation signed by a competent technician and endorsed by their professional association (Art. 24.6).

Checklist: the fire reaction dossier that should travel with your graphics

  1. An EN 13501-1 classification report for each material reference,including the laboratory, report number and date.
  2. Less than five years oldif you are building at Fira; at IFEMA, this is the safest reference.
  3. The tested end use(wall, ceiling, floor or suspended textile) and the substrate used in the test.
  4. The classification of the complete assemblywhen vinyl, laminate or veneer is involved.
  5. The DoP for boardswith CE marking.
  6. The event’s Specific Regulations,which may impose stricter requirements than the general regulations.
  7. B-s1,d0 for walls and ceilingsif the event is at IFEMA Palacio Municipal, and Euroclass B or higher for MWC decoration.

Sergio Triguero, Artyplan’s Director of Strategic Marketing and Business Development, puts it this way:

“The certificate is part of the order, just like the final artwork. If a material report is more than five years old, we need to know before printing, not once we are in the exhibition hall.”

This is how we handle exhibition stand graphics in Barcelona and Madrid: the certificate dossier for each material travels with the graphics, so the stand contractor and CAE coordination team do not have to chase it down in the exhibition hall. We apply the same approach to the rest of our printing for events and trade shows.

This article summarises the regulations in force as of 20 October 2026. Always check the Specific Regulations for your event and the current version of the venue regulations.

Frequently Asked Questions

What fire certificate does IFEMA require for a stand?

Under IFEMA’s General Regulations, materials must be C-s2,d0 for walls and ceilings, EFL for floors and Class 1 for suspended textiles, although the regulations do not require one specific certificate to be submitted. At Palacio Municipal, the requirement rises to B-s1,d0 and BFL-s1. The classification can be demonstrated by a report from an accredited laboratory or, for CE-marked products, the manufacturer’s DoP.

C-s2,d0 for wall and ceiling coverings, EFL for floors and Class 1 under UNE-EN 13773 for suspended textiles, both at Gran Via and Montjuïc. Fira may request a certificate from an accredited laboratory issued within the previous five years.

No. There is no official equivalence between the M classes of UNE 23727 and the Euroclasses. Some materials with a French “M1” classification have Euroclass C-s3,d0, below the minimum required by IFEMA and Fira.

The classification report is signed by an accredited laboratory; the Declaration of Performance is issued by the manufacturer; and the structural documentation is signed by a competent technician (at IFEMA, according to the event regulations). Note: a fire-retardant applicator’s certificate does not replace the laboratory report.

Materials with a classification report showing the required Euroclass. Materials that reach C-s2,d0 include fire-retardant MDF, FR frame textile, FR aluminium composite and FR honeycomb board. Standard composite (D-s2,d0), acrylic (E) and standard foamboard do not.

About the author

Arnau Forasté Sans is Artyplan’s Operations Director. His work focuses on production, technical management and the coordination of teams and processes, particularly on projects involving numerous materials, tight deadlines and large-scale graphic production. Artyplan has been producing graphic materials since 1965 at its Barcelona and Madrid facilities.

Sources

Share: